Accesories for high-pressure cleaners:

The right accessory for every task!

Kranzle accessories really help when it comes to getting more out of your pressure washer!

Below you will find an introduction to some of our more popular accessories for a wide variety of different applications.

For the full range and more details on Kranzle accessories, view the:

'Accessory section' of the Kranzle catalogue

Also available:

M22 threaded screw connection accessories catalogue

 

Kranzle foam lance demonstration video.
 

A brief overview of Kranzle lance types and their spray patterns.



Round Cleaner attachments are perfect for floor and wall surface cleaning; offering great results and keeping messy splash-back to a minimum.

 



Kranzle foam lances with 1 or 2 litre bottle for detergent/chemical application provide fantastic, thick creamy foam that stays on the surface for longer than traditional methods helping your prefered cleaning agent to perform better with longer contact.





The Kranzle 'Butler', is the perfect solution for storing your standard and extra accessories, like lances, hoses, brushes and more.

 



Underbody lances by Kranzle offer a protected 90 degree angled lance being ideal for working below and on top of things, perfect for chasis and archway cleaning and it also helps greatly for cleaning conservatory and garage roofs. With a wide spray jet, it doesn't matter that you may have the jet closer than normal as the spray area shall still cover a good size area. Also provided with a 500mm extension lance, which can be used with a wide variety of accessories where some extra length helps.





Water inlet filters help provide extra protection incase of water shortage to the pump due to blockages and prevents debris from entering the high-pressure pump. The inner mesh filter can easily be removed to be cleaned.

 



Crush resistant 3 metre suction hose with weighted filter and 3/4" screw on coupling connection for use with your high-pressure cleaner when drawing water in from water tanks, reservoirs, ponds, pools, lakes or the sea.




The Kranzle sand blasting attachment is perfect for use on very stubborn and rusted surfaces. Ideal for tackling projects such as restoring gates, fencing and even small boats and yachts. Typically used with kiln-dried grit, though other blasting material may be used, permissable size of grain between: 0.2mm to 2mm.

 


Rotary brushes from Kranzle are made using a very soft brush for fine finishes. The brush covers an 18cm area and rotates as water passes through, this reduces the need for any scrubbing action as it almost glides along the surface. If you have a low-pressure detergent system on your machine the Kranzle rotary brush will also draw in chemical if required for heavily soiled areas.


Pipe/Drain cleaning hoses are easy to use and excellent value for money; 3 rear firing jets blast clean the inner surface of pipework removing any build-up as the stainless steel torpedo head powers forward propelling through the pipe and around bends.
Optionally available with a forward firing jet with 3 rear firing nozzles, the pressure is reduced of the outwards spray though a forward firing jet can help in instances where some types of blockages require breaking up.

 




Our popular swivel fitting can be used between your hose and gun allowing you to easily stretch out the hose without causing kinks as the swivel fitting locks in place yet is able to spin freely.




Sludge suction units are great for clearing inspection pits, flood restoration work and cleaning/draining ponds, pools and reservoirs.

Suction of 10,000 ltrs/hr with 130 bar device;
Suction of 17,500 ltrs/hr with 220 bar device.

 


Kranzle special transmission oil,
Non-blending with water

1 litre volume Kranzle transmission oil:
Article 400932

Handy 250 ml with easy pour re-fill top Kranzle transmission oil:
Article 400931







Spray guards offer great splash-back protection can be used with most lances but are ideal when using a Dirtkiller lance..

 




Extension lances are available in lengths of 500 mm or 1,000 mm with a male fitting to connect to your trigger gun and a female coupling which can be used with a wide variety of accessories where some extra length helps. There's also a handy sized version with a grip designed for use with short guns to offer mid-full length cleaning options






Kranzle flat brushes are very soft and if you have a low-pressure detergent system on your machine the Kranzle flat brush will also draw in chemical if required for cleaning of heavily soiled areas.

 




Selection of Kranzle trigger guns with M22 threaded fittings or with quick-release fittings. Short and mid length versions available.






Selection of Kranzle lances contact us to see which is most suitable type of lance such as the Kranzle lance with knife jet or Dirtkiller lances designed to help with your particular cleaning requirements and to help with nozzle size guidance.

 


Selection of Kranzle high-pressure hoses designed to suit each of the machines we stock; some hoses are compatible between models.

Also available is a brass M22 (male) x M22 (male) hose connecting joiner piece for connecting multiple lengths of high-pressure hose. Article 13286


Kranzle Round Cleaner UFO demostration video.
 

A brief video overview of spray patterns and lance applications.




> View, search & discover info about high-pressure cleaner accessories on our 'Enquiries' section by clicking here